410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4″ Length Pack of 25

#ad
#ad
Small Parts 1012KPM410 #ad - The 410 stainless steel material offers high strength and hardness ratings, and resists corrosion in mild environments. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

The 410 stainless steel self-drilling screw with plain finish has a modified truss head and a Phillips drive. The modified truss head is extra wide with a low-profile dome and integral round washer. Plain surface has no finish or coating. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments.

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 3/4" Length Pack of 25 #ad - Modified truss head is extra wide with a low-profile dome and integral round washer. The material is magnetic. The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

Self-drilling screws, a type of self-tapping screw, are threaded fasteners that drill their own hole and thread it as they are installed. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

More information about Small Parts 1012KPM410 #ad

DuPont Teflon Snow and Ice Repellant, 10-Ounce

#ad
#ad
Finish Line Technologies, Inc. DSR616601 #ad - Apply to snow blowers, door gaskets and snow shovels. Simply spray onto surface when clean and prior to snowfall. Dupont snow & ice repellant with teflon Fluoropolymer prevents snow from building up on snow blowers, gutters, satellite dishes, plows, shovels, snow mobiles and more. Prevents snow and ice buildup, frozen doors and clogged augers and chutes.

Also great for snow mobiles, snow plows, and gutters and leaders. Fortified with Teflon fluoropolymer to enhance snow repellency. Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance.

More information about Finish Line Technologies, Inc. DSR616601 #ad


Similar products



410 Stainless #8 x 1/2" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , 1/2" to 1-5/8" Length in Listing, 100 pieces, Modified Truss Head Self Driller #8 x 1/2 inch

#ad
#ad
Chenango Supply S45H#08050 #ad - Self-drilling screws, also known as Tek screws, eliminate the need for a pre-drilled hole. Also great for snow mobiles, snow plows, and gutters and leaders. The length of the drill point determines the material thickness which the screw can reliably penetrate. These stainless teks are great to use in environments that are damp.

2 drill Point. Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance. Prevents snow and ice buildup, frozen doors and clogged augers and chutes. Tensile - 180, 000 psi, hardness - 40 Rockwell C. When selecting a self-drilling screw design, it is important to consider the material thickness and type of materials to be joined.

410 Stainless #8 x 1/2" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , 1/2" to 1-5/8" Length in Listing, 100 pieces, Modified Truss Head Self Driller #8 x 1/2 inch #ad - . Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. 410 stainless Steel. Apply to snow blowers, door gaskets and snow shovels.

More information about Chenango Supply S45H#08050 #ad


Similar products



Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1" Length Pack of 100

#ad
#ad
Small Parts 0816KPM #ad - The zinc plating offers corrosion resistance and has a reflective appearance. Steel is often used in applications where strength is the primary consideration. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole.

The steel self-drilling screw with zinc plating has a modified truss head and a Phillips drive. Modified truss head is extra wide with a low-profile dome and integral round washer. Tensile - 180, 000 psi, hardness - 40 Rockwell C. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

Steel Self-Drilling Screw, Zinc Plated Finish, Modified Truss Head, Phillips Drive, #2 Drill Point, #8-18 Thread Size, 1" Length Pack of 100 #ad - The modified truss head is extra wide with a low-profile dome and integral round washer. Also great for snow mobiles, snow plows, and gutters and leaders. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Prevents snow and ice buildup, frozen doors and clogged augers and chutes.

Apply to snow blowers, door gaskets and snow shovels. The phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to allow the driver to slip out of the head to help prevent over-tightening and damage to the thread or fastener.

More information about Small Parts 0816KPM #ad


Similar products



Capri Tools 10024 Hex Self Tapping Screw Assortment, 200-Piece

#ad
#ad
Capri Tools 10024 #ad - Each piece is constructed with zinc plated steel for corrosion resistance and a stainless shine. Each piece is constructed with zinc plated steel for corrosion resistance. This set is organized by size/type in a transparent storage case for quick access and protection. Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance.

Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Modified truss head is extra wide with a low-profile dome and integral round washer. A large assortment 8 of the most-used sizes is provided by this set to help save money.

Capri Tools 10024 Hex Self Tapping Screw Assortment, 200-Piece #ad - Set includes 8 most-used sizes: 30 pieces #8 x 1/2-inch, 30 pieces #8 x 5/8-inch, 20 pieces #10 x 5/8-inch, 20 pieces #10 x 1/2-Inch, 30 pieces #8 x 3/4-Inch, 20 pieces #10 x 3/4-Inch, 30 pieces #8 x 1-Inch, 20 pieces #10 x 1-Inch. Set organized by size/type in a transparent organizer case with snap-close cover for easy storage.

Zinc plating resists corrosion and has a reflective appearance. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. Steel is often used in applications where strength is the primary consideration. This capri tools 200-piece self tapping hex screw assortment is ideal for thicker gauge metal to metal in applications such as air conditioning, ventilation, and heating.

More information about Capri Tools 10024 #ad


Similar products



410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , 1/2" to 1-5/8" Length in Listing, 100 pieces, Modified Truss Head Self Driller #8 x 3/4 inch

#ad
#ad
Chenango Supply S45H#08075 #ad - Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. A large assortment 8 of the most-used sizes is provided by this set to help save money. 410 stainless Steel.

Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. This set is organized by size/type in a transparent storage case for quick access and protection. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

410 Stainless #8 x 3/4" Wafer Head Philips Self Drilling Sheet Metal Tek Screws , 1/2" to 1-5/8" Length in Listing, 100 pieces, Modified Truss Head Self Driller #8 x 3/4 inch #ad - 410 stainless Steel. Modified truss head is extra wide with a low-profile dome and integral round washer. 2 drill Point. Apply to snow blowers, door gaskets and snow shovels. Steel is often used in applications where strength is the primary consideration. Self-drilling screws, also known as Tek screws, eliminate the need for a pre-drilled hole.

Also great for snow mobiles, snow plows, and gutters and leaders. Zinc plating resists corrosion and has a reflective appearance.

More information about Chenango Supply S45H#08075 #ad


Similar products



Comdox 410 Stainless Steel Self Drilling Screws Kit Set, Wafer Head Phillips Sheet Metal Tek Screws Assortment Kit, Modified Truss Head, #8-18 Thread Size, 5/8" to 1-1/2" Length Pack of 200

#ad
#ad
Comdox CD-015 #ad - A large assortment 8 of the most-used sizes is provided by this set to help save money. All of screws will be packed in a sturdy plastic box, can be use for a storage box. Set includes 5 most-used sizes : 40 pieces #8 x 5/8", 40 pieces #8 x 1-1/4", 40 pieces #8 x 1", 40 pieces #8 x 3/4", 40 pieces #8 x 1-1/2".

Material: high quality 410 stainless steel, stainless steel with superior rust resistant ensure . 2 drill Point. 2 drill Point. We sell steel, spring washers, stainless steel and brass screws, hex nuts, nails, hex bolts, self tapping screws, rivets, flat washers, dry wall screws, self drilling screws, anchors, couplings and fixings.

Comdox 410 Stainless Steel Self Drilling Screws Kit Set, Wafer Head Phillips Sheet Metal Tek Screws Assortment Kit, Modified Truss Head, #8-18 Thread Size, 5/8" to 1-1/2" Length Pack of 200 #ad - Each piece is constructed with zinc plated steel for corrosion resistance and a stainless shine. Material: 410 stainless steel ●package quantity:200pcs package included: 40pcs #8 x 5/8" 40pcs #8 x 3/4" 40pcs #8 x 1" 40pcs #8 x 1-1/4" 40pcs #8 x 1-1/2" Tips:Products contain small parts, please do not let children play, to prevent inadvertent swallowed Comdox is a professional company of fasteners.

Quality products with very competitive prices and efficient services" is the goal that we are working for and the key to our success. These stainless teks are great to use in environments that are damp. Steel is often used in applications where strength is the primary consideration. Apply to snow blowers, door gaskets and snow shovels.

Tensile - 180, 000 psi, hardness - 40 Rockwell C.

More information about Comdox CD-015 #ad


Similar products



410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1" Length Pack of 25

#ad
#ad
Small Parts 1016KPM410 #ad - Each piece is constructed with zinc plated steel for corrosion resistance and a stainless shine. Apply to snow blowers, door gaskets and snow shovels. 410 stainless Steel. Set includes 5 most-used sizes : 40 pieces #8 x 5/8", 40 pieces #8 x 3/4", 40 pieces #8 x 1-1/4", 40 pieces #8 x 1", 40 pieces #8 x 1-1/2".

Material: high quality 410 stainless steel, stainless steel with superior rust resistant ensure . All of screws will be packed in a sturdy plastic box, can be use for a storage box. The drill point length should be long enough to penetrate both materials being fastened before the threading portion reaches the material.

410 Stainless Steel Self-Drilling Screw, Plain Finish, Modified Truss Head, Phillips Drive, #3 Drill Point, #10-16 Thread Size, 1" Length Pack of 25 #ad - Steel is often used in applications where strength is the primary consideration. 2 drill Point. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. The 410 stainless steel material offers high strength and hardness ratings, and resists corrosion in mild environments. Prevents snow and ice buildup, frozen doors and clogged augers and chutes.

This set is ideal for thicker metal-to-metal applications such as air conditioning and ventillation. Usually only recommended for use with metal, self-drilling screws are available with wings that enable use when fastening wood to metal. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole.

More information about Small Parts 1016KPM410 #ad


Similar products



Stainless #10 X 3/4" Tek Screw 100 pcs Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces

#ad
#ad
Chenango Supply S45A#10075 #ad - High-quality 410 stainless steel self drilling screws. 3 drill Point. A large assortment 8 of the most-used sizes is provided by this set to help save money. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening.

2 drill Point. These work great on gutters. These #10 x 3/4" stainless teks are great to use in environments that are damp. Tensile - 180, 000 psi, hardness - 40 Rockwell C. Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance. All of screws will be packed in a sturdy plastic box, can be use for a storage box.

Stainless #10 X 3/4" Tek Screw 100 pcs Hex Washer Head Self Drilling Sheet Metal Tek Screws With Drill Point, 410 Stainless Steel, Self Driller, 100 pieces #ad - Set includes 5 most-used sizes : 40 pieces #8 x 5/8", 40 pieces #8 x 3/4", 40 pieces #8 x 1", 40 pieces #8 x 1-1/4", 40 pieces #8 x 1-1/2". Material: high quality 410 stainless steel, stainless steel with superior rust resistant ensure . Apply to snow blowers, door gaskets and snow shovels. This set is organized by size/type in a transparent storage case for quick access and protection.

Zinc plating resists corrosion and has a reflective appearance. Modified truss head is extra wide with a low-profile dome and integral round washer.

More information about Chenango Supply S45A#10075 #ad


Similar products



Parts Express #8 x 1/2" Phillips Truss Head Screws 100 Pcs.

#ad
#ad
Parts Express 081-480 #ad - Zinc plating resists corrosion and has a reflective appearance. 410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Plain surface has no finish or coating. Driver size: 5/16" Hex. 3 drill Point. Each piece is constructed with zinc plated steel for corrosion resistance and a stainless shine.

410 stainless Steel. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. Steel is often used in applications where strength is the primary consideration. Great for using on Gutters! Prevents snow and ice buildup, frozen doors and clogged augers and chutes. Apply to snow blowers, door gaskets and snow shovels.

Parts Express #8 x 1/2" Phillips Truss Head Screws 100 Pcs. #ad - Tensile - 180, 000 psi, hardness - 40 Rockwell C. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole. Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. A large assortment 8 of the most-used sizes is provided by this set to help save money.

Phillips drive has an x-shaped slot that accepts a Phillips driver and is designed to prevent over-tightening. Screw type: Phillips drive wafer head self drilling screws.

More information about Parts Express 081-480 #ad


Similar products



Parts Express #8 x 3/4" Self-Tapping Truss Head Screws 100 Pcs.

#ad
#ad
Parts Express 081-465 #ad - Steel is often used in applications where strength is the primary consideration. This set is ideal for thicker metal-to-metal applications such as air conditioning and ventillation. Driver size: 5/16" Hex. Modified truss head is extra wide with a low-profile dome and integral round washer. 410 stainless Steel.

High-quality 410 stainless steel self drilling screws. This set is organized by size/type in a transparent storage case for quick access and protection. 2 drill Point. Eliminate pre-drilling in sheet metal with the self tapping design of this assortment. Screw type: Phillips drive wafer head self drilling screws.

Parts Express #8 x 3/4" Self-Tapping Truss Head Screws 100 Pcs. #ad - Prevents snow and ice buildup, frozen doors and clogged augers and chutes. Save when you buy the 2-Pack! Non-stick clear coating formulated with Teflon fluoropolymer and silicone to ensure optimum non-stick performance. Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole.

410 stainless steel has high strength and hardness ratings and resists corrosion in mild environments. Save when you buy the 2-Pack! Type bsd is a tapping screw with spaced threads and a drill point which drills its own hole.

More information about Parts Express 081-465 #ad


Similar products