Gardner Bender OX-100B Not Available OZ ALU Compound

#ad
#ad
Gardner Bender OX-100B #ad - The grease base ensures brush-ability over a wide temperature range, tenacious adherence to all surfaces, resistance to water wash out and the prevention of rust and corrosion. 1 oz. This reduces the connection temperature under high power conditions by a reduced voltage drop and by providing a heat conductivity path to the connection's substrate.

This has a twofold effect; it improves electrical conductivity and it improves thermal conductivity. Ox-gard anti-oxidant compound contains prime grade zinc and is formulated with metallic zinc to create a compound that enhances electrical and thermal conductivity which is used on high power crimp connections and stud bolt mountings.

Gardner Bender OX-100B Not Available OZ ALU Compound #ad - Ox-gard anti-oxidant Compound is manufactured with unique grease compounded from custom refined low sulphur oil. Carded. For application to all aluminum wire leads to prevent oxidation and shorting. Also prevents corrosion of aluminum conduit joints. This makes the product easier and more reliable to use. When the connection is tightened, the grease is displaced, leaving a layer of zinc filling in the surface imperfections of the interface.

More information about Gardner Bender OX-100B #ad

King Innovation 2 Port AlumiConn Connector-10 Pack

#ad
#ad
King Innovation 95025-10 #ad - Voltage: 300v wire type: aluminum/aluminum, aluminum/copper, copper/copper aluminum wire range: min #12/Max #10 Copper Wire Range: Min #18/Max #10 Temperature Rating: 105°C Flammability Rating: V-2 2-port alumiconn - Permanent Aluminum Wiring Solution. Features & benefits: approved by the consumer products safety commission cpsc and insurance companies secure, mechanical connection of conductors runs approximately 25°F cooler than purple twist-ons Provides a safer connection Separate ports eliminate intermixing of conductors One piece for easy installation Dielectric silicone inhibitor reduces corrosion of connection Tin-plated lug and nickel-plated screws UL 486C to meet US and Canadian standards Suitable for aluminum to aluminum, aluminum to copper, and copper to copper wire splices Available in 2-Port and 3-Port styles PRODUCT SPECIFICATIONS & MEASUREMENTS: Max.

More information about King Innovation 95025-10 #ad


Similar products



Ideal 30-765 Twister Al/Cu Wire Connector, Card of 10

#ad
#ad
Ideal 30-765 #ad - Specially formulated corrosion-resistant compound. Provides a secure connection while preventing aluminum corrosion. Walter becker started the Ideal Commutator Dresser Company of Chicago from his mother's kitchen. It has a specially formulated corrosion-resistant compound that provides cooler connections and increased conductivity.

He manufactured commutator dresser stones with the belief that every product should be worth more than the price paid for it. That idea has been the core Ideal business principle for over 90 years. 2-port alumiconn - Permanent Aluminum Wiring Solution. Service, he said, was part of the product. Provides cooler connections and increased conductivity.

Ideal 30-765 Twister Al/Cu Wire Connector, Card of 10 #ad - In 1916, J. The ideal 30-765 wire connector is an aluminum-to-copper connector that provides a secure connection while preventing aluminum corrosion. Today, the many loyal distributors and customers that make Ideal successful are a testament to Becker's original philosophy. Aluminum-to-copper connector.

More information about Ideal 30-765 #ad


Similar products



Easy-Splice In-Line Gel Splice Kit with Connector, 2-4/0 AWG Wire Range

#ad
#ad
NSi Industries ESGS-4/0 #ad - Aluminum-to-copper connector. Nsi easy-splice in-line gel splice kit is UV resistant and includes one dual-rated connector for use with copper or aluminum conductors. This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices. This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices.

Nsi easy-splice in-line gel splice kit provides a sealed splice for underground, buried and overhead applications. 2-port alumiconn - Permanent Aluminum Wiring Solution. The splice kit is watertight for use in all locations. Provides cooler connections and increased conductivity. Sealing and corrosion protection provided by sealant gel.

Easy-Splice In-Line Gel Splice Kit with Connector, 2-4/0 AWG Wire Range #ad - Simply install the connector on a copper or aluminum cable, place it in the closure, and snap closed. Qualified to ANSI C119. 1 -1986 for underground splicing. Provides a secure connection while preventing aluminum corrosion. Qualified to ansi c119.

More information about NSi Industries ESGS-4/0 #ad


Similar products



15 Pack Ideal Al/Cu Twister #65 Purple Wire Connectors Copper To Aluminum

#ad
#ad
Ideal Industries #65 #ad - This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices. Aluminum-to-copper connector. 15 pack of authentic ideal industries #65 Purple Al/CU Alumiconn Wire Connectors used for Aluminum to Copper Wire Terminations. Ul listed and CSA Certified.

Shell rated for 105° C, Flame-retardant shell. Provides cooler connections and increased conductivity. Accepts 1 #12 al sol. Specially formulated corrosion-resistant compound provides cooler connections and increased conductivity. Sealing and corrosion protection provided by sealant gel. 2-port alumiconn - Permanent Aluminum Wiring Solution.

15 Pack Ideal Al/Cu Twister #65 Purple Wire Connectors Copper To Aluminum #ad - W/ 1 #18 cu awG min. Provides a secure connection while preventing aluminum corrosion. Qualified to ansi c119. 1 -1986 for underground splicing. Specially formulated corrosion-resistant compound. Aluminum-to-copper connector provides a secure connection while preventing aluminum corrosion. And 1 #10

More information about Ideal Industries #65 #ad


Similar products



King Innovation 95125 3 Port Aluminum To Copper Lug 12-10 AWG Aluminum 18-10 AWG Copper Bag of 25

#ad
#ad
King Innovation 95125 #ad - King innovation 95125 3 port aluminum to copper lug 12-10 awg aluminum 18-10 AWG Copper Bag of 25 2-port alumiconn - Permanent Aluminum Wiring Solution. The easy-splice in-line gel splice kit provides a sealed splice for underground, buried and overhead applications. Shell rated for 105° C, Flame-retardant shell.

Ports of connectors contain a layer of Corrosion Inhibitor. And 1 #10 Tin plated lug with three ports and nickel-plated compression screws. And canadian specifications. Simply install the connector on a copper or aluminum cable, place it in the closure, and snap closed. Accepts 1 #12 al sol. W/ 1 #18 cu awG min.

King Innovation 95125 3 Port Aluminum To Copper Lug 12-10 AWG Aluminum 18-10 AWG Copper Bag of 25 #ad - Aluminum-to-copper connector. Specially formulated corrosion-resistant compound provides cooler connections and increased conductivity. More cost-effective alternative for replacing aluminum electrical wire systems. Aluminum-to-copper connector provides a secure connection while preventing aluminum corrosion.

Sealing and corrosion protection provided by sealant gel. Specially formulated corrosion-resistant compound. Approved by consumer Products Safety Commission CPSC and insurance companies.

More information about King Innovation 95125 #ad


Similar products



King Innovation 3-Port Aluminum To Copper Lug 12-10 AWG Aluminum 18-10 AWG Copper

#ad
#ad
King Innovation 95125 #ad - Aluminum-to-copper connector provides a secure connection while preventing aluminum corrosion. Provides a safer connection. King innovation 3 Port AlumiConn Connector. Temperature Rating: 105°C. Provides a safer connection. Ul 486c to meet US and Canadian standards. Tin-plated lug and nickel-plated screws. Max. One piece for easy installation.

And 1 #10 One piece for easy installation. Aluminum wire range: Min #12/Max #10 Ul 486c listed to meet u. S. Separate ports eliminate intermixing of conductors. W/ 1 #18 cu awG min. Suitable for aluminum to aluminum, aluminum to copper, and copper to copper wire splices. Provides cooler connections and increased conductivity.

King Innovation 3-Port Aluminum To Copper Lug 12-10 AWG Aluminum 18-10 AWG Copper #ad - Dielectric silicone inhibitor reduces corrosion of connection. Ul 486c to meet US and Canadian standards. Simply install the connector on a copper or aluminum cable, place it in the closure, and snap closed. Tin plated lug with three ports and nickel-plated compression screws.

More information about King Innovation 95125 #ad


Similar products



Siemens EC2GB152 Ground Bar Kit with 15 Terminal Positions and a Ground Lug

#ad
#ad
Siemens -HI EC2GB152 #ad - Separate ports eliminate intermixing of conductors. One piece for easy installation. Approved by consumer Products Safety Commission CPSC and insurance companies. Accepts 1 #12 al sol. Qualified to ansi c119. 1 -1986 for underground splicing. Secure, mechanical connection of conductors. Ul 486c listed to meet u. S. Tin-plated lug and nickel-plated screws.

15 terminal openings. Includes ground lug with wire range of No. 14 - 2/0 cu/al. The easy-splice in-line gel splice kit provides a sealed splice for underground, buried and overhead applications. W/ 1 #18 cu awG min. Specially formulated corrosion-resistant compound provides cooler connections and increased conductivity.

Siemens EC2GB152 Ground Bar Kit with 15 Terminal Positions and a Ground Lug #ad - Ul listed and CSA Certified. And canadian specifications. Tin plated lug with three ports and nickel-plated compression screws. More cost-effective alternative for replacing aluminum electrical wire systems. Provides a secure connection while preventing aluminum corrosion. Ports of connectors contain a layer of Corrosion Inhibitor.

More information about Siemens -HI EC2GB152 #ad


Similar products



Square D by Schneider Electric PK23GTACP 23 Terminal Load Center Ground Bar Kit

#ad
#ad
Square D by Schneider Electric PK23GTACP #ad - Note - consult local code for correct application of ground bar kit for service entrance equipment. More cost-effective alternative for replacing aluminum electrical wire systems. W/ 1 #18 cu awG min. Provides a safer connection. 20-40 circuits. Dielectric silicone inhibitor reduces corrosion of connection. Necessary with Equipment Used As Service Entrance.

Used in load centers, cSED devices and NQOD and NF panel boards. Ul 486c listed to meet u. S. And canadian specifications. Approved by consumer Products Safety Commission CPSC and insurance companies. The easy-splice in-line gel splice kit provides a sealed splice for underground, buried and overhead applications.

Square D by Schneider Electric PK23GTACP 23 Terminal Load Center Ground Bar Kit #ad - Shell rated for 105° C, Flame-retardant shell. For 200a main breaker Installed Load Centers. Each terminal opening accepts No. 14-4 cu/al conductors. Secure, mechanical connection of conductors. Accepts 1 #12 al sol. Ansi certified and UL Listed.

More information about Square D by Schneider Electric PK23GTACP #ad


Similar products



Q2100 100-Amp Double Pole Type QP Circuit Breaker

#ad
#ad
Siemens Q2100 #ad - Provides a safer connection. Each terminal opening accepts No. 14-4 cu/al conductors. 10, 000 aic interrupting rating. Ul 486c to meet US and Canadian standards. Ul listed and CSA Certified. For 200a main breaker Installed Load Centers. The easy-splice in-line gel splice kit provides a sealed splice for underground, buried and overhead applications.

Aluminum-to-copper connector. Approved by the consumer Products Safety Commission CPSC and insurance companies. Includes ground lug with wire range of No. 14 - 2/0 cu/al. One piece for easy installation. Necessary with Equipment Used As Service Entrance. This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices.

Q2100 100-Amp Double Pole Type QP Circuit Breaker #ad - Aluminum-to-copper connector provides a secure connection while preventing aluminum corrosion. Ports of connectors contain a layer of Corrosion Inhibitor. Secure, mechanical connection of conductors. 20-40 circuits. Use for overload and short-circuit protection of your electrical system.

More information about Siemens Q2100 #ad


Similar products



100' Aluminum URD Dyke 2-2-2-4 Cable Direct Burial Quadruplex Secondary Wire

#ad
#ad
Nassau #ad - Each terminal opening accepts No. 14-4 cu/al conductors. Accepts 1 #12 al sol. Provides cooler connections and increased conductivity. Ground Bar Kit. Phase conductor-Size AWG: 2. Approved by consumer Products Safety Commission CPSC and insurance companies. Sealing and corrosion protection provided by sealant gel. Double pole, 100 amp, 240V type QP Circuit Breaker.

This in-line closure offers a fast and simple method for splicing, insulating and environmentally sealing low voltage cable splices. Aluminum-to-copper connector provides a secure connection while preventing aluminum corrosion. Ul 486c to meet US and Canadian standards. Returns will not be honored on this closeout item.

100' Aluminum URD Dyke 2-2-2-4 Cable Direct Burial Quadruplex Secondary Wire #ad - Provides a secure connection while preventing aluminum corrosion. Nominal o. D inches: 0945. 2-port alumiconn - Permanent Aluminum Wiring Solution. Specially formulated corrosion-resistant compound. And 1 #10

More information about Nassau #ad


Similar products